Push SetCode: HWS004
Product detailed description
Industrial IoT Kit
HARDWARIO TOWER is an industrial kit that makes it easy to build IoT projects. It is particularly suitable for Industry 4.0 pilots, active STEM education and smart home projects. The assembled sensors, detectors and actuators have low power consumption and can run on batteries for several years.
The Push Set will allow you to wirelessly trigger actions, send temperature and device orientation. In addition to short presses, it can also distinguish between double presses and long presses. Push Set contains:
- Core Module,
- Button Module,
- Mini Battery Module,
- 2 AAA batteries,
- 3D-printed enclosure 101,
- rubber bands.
The set does not include the Radio Dongle, which you need to communicate with the computer. If you don't have it yet, be sure to buy it.
The basic function of this kit is a button, but because the Core Module is also equipped with a 3-axis accelerometer and digital thermometer, there are a variety of projects you can do with the kit. You can find the basic projects on the web.
For the Start Set, we have prepared a sample STEM education lesson for primary and secondary schools and after-school clubs.
The kit includes the HARDWARIO Playground app, which can be downloaded for Windows, MacOS and Linux computers. With the application, you connect the assembled devices to the created radio network, set the purpose of each device according to the selected firmware and add the required functions using the Node-RED application.
The entire kit is open-source and supports integrations with popular platforms such as Microsoft Azure, AWS, Ubidots, Blynk, IFTTT, Amazon Alexa, Google Home or Apple HomeKit.
More about Core Module
|32-bit ARM Cortex M0+ STM32L083CZ
|SPIRIT1 868 or 915 MHz
|192 kB flash / 20 kB RAM
|from 2V to 3.6V
|< 30 μA
|Operating temperature range
|from -40 to +70 °C
|33 mm (width) × 55 mm (height)
|18× GPIO, 3× UART, 2× I2C
1× SPI, 5× ADC, 2× DAC,
10 pins SWD connector for debugging
|Uploaded firmware in this set