Proceed to cart
Customer support:ask@hardwario.com
    Prices in:
    Home / IoT Kit TOWER / Modules and Tags / Tag Module

    Tag Module

    Code: HWM006
    Brand: HARDWARIO
    tag module a1
    €19 €23 incl. VAT
    In stock

    The Tag Module makes it possible to connect up to six TOWER tags. There are two independent I²C buses (I2C0 and I2C1) - one on each side. This allows connecting two tags of the same I²C address to a single TOWER node. It also features pull-up resistors on SDA/SCL signals of the I2C1 bus.

    Detailed information

    Related products

    barometer tag a1
    Barometer Tag
    In stock
    €10,90 incl. VAT
    €9

    The Barometer Tag allows you to measure absolute pressure in the range from 20 kPa to 110 kPa, or altitude above the sea level in meters. It uses a low-power I²C sensor...

    Code: HWT003
    humidity tag a1
    Humidity Tag
    In stock
    €23 incl. VAT
    €19

    The Humidity Tag uses a high-accuracy humidity sensor SHT20 with a typical accuracy of ±3 % from 20 % to 80 %. This sensor is digital and calibrated. It communicates using an...

    Code: HWT002
    lux meter tag a1
    Lux Meter Tag
    In stock
    €18,20 incl. VAT
    €15

    The Lux Meter Tag uses a high dynamic range light intensity sensor OPT3001 that can measure illuminance from 0.01 to 83,000 lux. This sensor is digital and calibrated. It...

    Code: HWT004
    nfc tag a1
    NFC Tag
    In stock
    €23 incl. VAT
    €19

    The NFC Tag operates as a dual port memory. You have the the NFC protocol from one side and the I²C bus interface from the other side. It features a 1 kB EEPROM memory. The chip...

    Code: HWT001
    temperature tag a1
    Temperature Tag
    In stock
    €23 incl. VAT
    €19

    The Temperature Tag uses a high-accuracy temperature sensor TMP112 with a typical accuracy of ±0.1 °C at 25 °C. This sensor is digital and calibrated. It communicates using an...

    Code: HWT005
    Show all related products Previous product Next product

    Product detailed description

    The Tag Module makes it possible to connect up to six TOWER tags. There are two independent I²C buses (I2C0 and I2C1) - one on each side. This allows connecting two tags of the same I²C address to a single TOWER node. It also features pull-up resistors on SDA/SCL signals of the I2C1 bus.

    Some TOWER modules already have one or more extra 5-pin sockets allowing you to connect a TOWER tag, but sometimes the number of positions is not enough, the socket is not available, or you need to extend the I²C bus with an additional channel. And that’s when the Tag Module can help.

    Features

    • 6x 5-pin socket position for TOWER tag
    • 3x tag positions are connected to I2C0 (right side)
    • 3x tag positions are connected to I2C1 (left side)
    • Integrated pull-up resistors on SDA/SCL signals of I2C1 bus
    • Operating temperature range: -20 to 70 °C
    • Mechanical dimensions: 44 x 55 mm

    Resources

    Additional parameters

    Category: Modules and Tags
    Warranty: 3 years

    Be the first who will post an article to this item!

    Only registered users may post articles. Please log in or register.

    Do not fill out this field: